Use code: MERCH15 for 10% off your order.

Use code: MERCH15 for 15% off your order.

0 items / $0.00
Menu
0 items / $0.00

Care Instructions

Home » Care Instructions

Care Instructions for DTF

  • Machine Wash on cool
  • Inside out on gentle cycle
  • Washer recommended amount of detergent
  • Tumble dry, low cycle
  • Air dry is preferred for longer lasting print
  • No bleach
  • Wash with like colors/materials

Care Instructions for Screenprint

  • Machine Wash on cool
  • Insideout on gental cycle
  • Washer recommend amount of detergent
  • Air dry is predered for longer lasting print
  • No bleach
  • Wash with like colors/material
  • All screen print pricing
  • All screen print application or care instructions
  • We no longer offer screen printing services

DTF transfer Instructions

  • Heat press at 300 Degrees
  • Determine location for print
  • Prep area with a press of 10 seconds
  • Place and line up print
  • Cover print with teflon finishing sheet
  • Press for 15 seconds
  • Cold peel
  • Wait 30 seconds before peeling film
  • Cover image with teflon finishing sheet
  • Press second time for 10 seconds
  • Let cool and it’s done
  • Medium pressure (must use commercial heat press)

How to "Dry" Apply Vinyl Decal

  • Identify location you want to apply
  • Place decal on area to measure
  • With protective backing on
  • Make sure area is completely dry
  • Use tape measure to find the center
  • Use masking tape to mark area
  • Clean area
  • Use soft cloth & mild cleaner
  • Wipe with rubbing alcohol (will evaporate)
  • Don't use any cleaners that could leave a film
  • Allow area to dry completely
  • Peel off the beginning of backing
  • Using tape guide and apply
  • Use a straight edge squeegy or credit card press firmly and rub
  • Wait 30 minutes before removing cover film
  • Start at corner and begin to peel transfer tape off
  • If you have bubble use sqeegy or credit card to press out

How to "wet" apply vinyl decal

  • Identify location you want to apply
  • Place decal on area to measure
  • With protective backing on
  • Make sure area is completely dry
  • Use tape measure to find the center
  • Use masking tape to mark area
  • Clean area
  • Use soft cloth & mild cleaner
  • Wipe with rubbing alcohol (will evaporate)
  • Allow area to dry completely
  • Using water & a small amount of dawn dish soap spray area
  • Peel entire backing off
  • Spray print with soap/water solution
  • Use masking tape guide and apply
  • Use a straight edge sqeegy or credit card press firmly and rub
  • Wait till water is dry or up to 24hrs
  • Once area is dry begin removing transfer tape
  • Start at the corner and slowly peel backing off
  • If you have bubbles use squeegy or credit card to press out
  • If decal is still sticking to transfer tape and not desired area wait long
Shopping cart
close
Start typing to see products you are looking for.

Successfully! Oops!

close

Return to shop View cart

Select options

close